Feeds:
Posts
Comments

Archive for the ‘3D Printed Models’ Category

So, 3 items under the camera … Chris gave me a P&G SU-76i quite a while ago, and I’ve been meaning to get round to it … the SU-122 I did years ago. It’s a conversion from a FoW T-34 which I did mainly because I wanted the turret for one of my trains (I figured it was less of a build to put the assault gun casement on the tank chassis than to scratch build a decent turret for the train). It’s been sitting around in the tank division box with just a basic green coat.

Finally, there’s a big gun from Butlers Printed Models

SU-122

I’ve repaired a bit of damage, given it a drybrush and applied some decals. I suspect the bow tactical mark is a bit big but it’ll do. And there’s something on the roof to let the Sturmoviks know whose side you’re on.

SU-76i

This is a 3D print, and not to badly affected by the layering process. The only thing I didn’t like was the over-sized gun barrel (so I replaced with a bit of spare plastic). OK, I did do a bit of filing – but once the original gun was chopped off, there wasn’t too much to do.

I left the base blank for now as I didn’t quite know where the 76i would fit in – but looking around for contemporary pics, I can see it’s going to end up in the Winter box with a snowy base.

I swapped the 3D printed fuel tanks for some FoW ones. But, basically, it’s a nice little model.

Extra Heavy Artillery

This is a WWI British BL9.2 inch from Butlers Printed Models but they were quite widely used and survived into WW2. The soviets had some and deployed them in the Winter War against the Mannerheim Line.

I will happily use them in a generic way for siege artillery.

Here’s a Peter Pig Russian Officer alongside to give a sense of scale …

And here it is with a the other big gun options …

I think it will work quite nicely …

This is a Skoda siege howitzer of the type which some of the Axis allies supplied for the siege of Sevastopol.

Read Full Post »

So this is both an update on my long-running ‘trains and boats and planes’ saga as well as a potted review of a new 3D modl by Butlers: the Heinkel HE 111.

BPM’s 1:200 scale HE111 over the Sea of Azov (escorted by a Revell FW190 and Zvezda ME109 – both 1:144)

If we;ve discussed this before, you’ll know I favour going one or more scales down for air support … for 15mm/1:100, I prefer 1:144 fighters and fighter/dive bombers, 1:200 bombers and transports, smaller for very large plans and airships (my TB3 Bomber is approx 1:250 IIRC). To me, it both looks less clumsy than uniform scaling and nods to the very different time and distance scales that the Air Arms are running to.

I know some of you won’t agree, so I won’t press the point.

Zvezda came close to my thinking with the aesthetics of Art of Tactic (1:72 figues; 1:100 vehicles; 1:144 fighters; 1:200 bombers … tiny boats and trains*)

Zvezda’a JU52s have been very handy, and for a light bomber, their JU88 was a bit bland but sill useful. But what I’ve really wanted was a Heinkel HE111 … it’s somehow the WW2 Axis bomber.

Butlers Printed Models have filled that gap, with a Heinkel in, as always, a wide variety of scales – and this is my experience of the 1:200 model

Much though I was looking forward to it, however, I have to admit I didn’t really take to this one. Planes like this are very ’rounded’ so I’m not really convinced that the plastic layering type of 3D printing is really appropriate for this sort of model. There are no windows as such, of course, it’s just a solid piece (that pretty much goes with the territory – but isn’t really my thing, nevertheless). The model comes as 5 parts – a single piece for most of the plane + separate engines each of 2 pieces. The engine pieces are badly sized and don’t really fit together.

Additionally, like the Zvezda JU88s, it is a very bland piece – if you want MGs, propellers, undercarriage, antennae etc. you’ll have to make your own. Needless to say, there are no decals with it – so, as supplied, I really do mean bland,

In the end, I’m fairly comfortable with the appearance of my HE111 – but that’s after a lot of filing, drilling, filling and fitting (so a long old slog) …

The picture from BPM’s website which doesn’t show that the engines are separate + some of the extra stages I think are necessay

On decals/livery, first, an apology to Luftwaffe buffs … the appearanc and markings are just generic, from what I had in my box of tricks … I have not represented a particular squadron or theatre. Second, whilst fellow enthusiasts might generally think my aversion to printing striations is a bit fussy, I’d add a caveat: fixing decals to rough surfaces isn’t always straightforward – so in this case I’d like to go as smooth as possible!

As you can see, I didn’t manage to get a completely smooth surface (although the camera does tend to accentuate the problem). The paint doesn’t adhere too well either!

(Yesthatphil’s BPM HE111)

On balance, therefore, I’d have much preferred this was a Zvezda model (!) … it would have gone together in minutes, wouldn’t have needed filling and at least would have had undercarriage, props and decals.

Useful if you need a small scale Heinkel, but larger than 1:200, I’d have thought the lack of detail would become increasingly unattractive. So unless it meets a specific need, I’d not really recommend this one.

1:200 scale BMP Heinkel: in dispersal with a couple of Zvezda JU88s and, nearby, a JU52)

All images are copyright Yesthatphil, so asking or acknowledging would be appropriate (wink)

(Not Quite Bundesarchiv)

*so I don’t like the figures and vehicles being different, and wouldn’t go with the tiny boats and trains – but I suspect for Zvezda it was a case of fitting symbolic models to the size of their grid!

Read Full Post »

Following swiftly on the CoW report, I’d like to add an update on the German HQ group from June.

They are pretty much done now. I did a little experiment with some decals – a learning process. I’ll get the surfaces flatter next time. Still not so bad (especially given they’re not even the right size) …

Anyway, here’s the group, followed by some of the individual models. I hope you like them!

The mobile phone camera is a bit harsh on the 3D printing striations. They’re not so noticeable with the naked eye.

‘K’ for Kleist, of course. The slightly oversized numberplates work fine on the back. I’ll have another go at the car pennon *wry smile* (we’ll get there in the end).

Figures by Peter Pig, cyclist and friend by Paint and Glue courtesy of NQM Chris. The bicycle is very fragile. There’s a wireman there so they can keepin touch.

The radio truck is an old bit of Matchbox optimistically grafted onto the back of a Zvezda Art of Tactic Opel Blitz. It looks nice now it’s tidied up (here, with the Flakpanzer for a bit of protection) . ..

The air recognition flag is painted but the swastika is a decal. Again it turned out OK I think.

Peter Pig crew, as you’d expect. The gunner took a bit of persuading.

In action …

Well I never …

Stalingrad won’t be much fun.

Read Full Post »